Product/Service

PMD2 Elliptic Security Metal Detectors

Source: HighCom Security, Inc.
The PMD2 Security Metal Detector allows the position of the weapon to be located on persons as they pass through the detector
As with other models, the usable transit width is 32 inches, satisfying the requirements of public access regulations and allowing the person passing through the metal detector to be seen from any position.

The PMD2 Security Metal Detector allows the position of the weapon to be located on persons as they pass through the detector; this allows persons to be screened faster and with a greater degree of efficiency. The LED's will indicate the mass or masses of metal on the person as they pass through.

The PMD2 security metal deterctor is very easy to program through the use of Chip Card Technology allowing immediate programming of the system and the selection of International Security Standards(Security Level).

PMD2 Ellipticä Security Metal Detector -- Advanced Features

  • Programmable chip-card
  • Very high discrimination
  • Excellent immunity
  • Light bar with eighteen zones of high visibility and wide visual angle
  • Location zones are not fixed
  • Single or Multi-zone alarm display
  • Very low alarm rate
  • All options available
Optional:
Fixing Plates for portable applications (Elliptical models security metal detectors)

HighCom Security, Inc., 1400 Jones Street, Suite 204, San Francisco, CA 94109. Tel: 415-441-0740; Fax: 415-771-2410.